The High Current Rectifiers listed on this website is customized, just for your reference. If you have any specific demands,please tell us the parameters in details. We’ll be more than happy to work with you to meet your exact requirements.
The main parameters of our Thyristor / Diode High Current Rectifiers for Industrial Applications:
A)Voltage Specification: 5V - 3000V
B) Current Specification: 300A - 240000A
C) Output Current Adjusting Range: 0 - 1000A
Structure overview:
The control cabinet is of GGD closed structure and opposed access door at the front and back for operation and maintenance. The gauge, control switch and potentiometer are installed front door plank of the cabinet; the signal light is installed on the top panel in the front of the cabinet and the entrance hole is set at the bottom of the cabinet for user connection. See Figure (II) for its appearance and installation dimensions.
Technical Parameters
Model |
ZHS70000A/1500V |
Efficiency |
≥99.7% |
Input Voltage |
AC110KV |
Rated Voltage |
DC1500V |
Input Current |
AC332A |
Rated Current |
DC70000A |
Range of Regulation
|
On-load Voltage + Switch Regulation: 15%-105% Udn |
||
Notes forOrder
|
Input Voltage |
AC300V-330KV |
Optional |
Frequency |
40-60Hz |
Optional |
|
Current Regalation |
Optional |
||
Voltage Regulation |
Optional |
||
Rated Current |
Optional |
||
Rated Voltage |
Optional |
||
Cooling Mothed |
Water,Air,natural or Forced Draft Cooling |
Optional |
Digest of High Current Rectifier(HCR)technical documents.
Part fifteen of User Manual
Chapter VI. Rectifier System Touch Screen Operation Display Interface
Main operation screen
User login screen
The default mode setting password is 8496 and the default parameter setting and debugging setting password is 6599.
Data display screen
Mode setting screen
Range setting screen 1
Range setting screen 2
High Current Rectifier(HRC) ZHS-70000A/1500V Structure Feature & Advantages
▲ Adopted cophase counter parallel connection Rectification,wihich can increase the power factor and reduce power loss
▲ Three-phase bridge rectification,which has the characteristics of reliability,stability,and low losses
▲ Adopted aluminum frame and glass antimagnetic cabinet, which suit for monitor and maintenance
▲ Power is scalable
▲ Can be maintained with electricity.
▲ With Low noise
▲ Easy to operate
▲ Superiority of Ture Rdundancy technique
▲Over / low Voltage protection
▲Over / low current protection
▲Over / lack water protection
▲Over temperature protection
▲Fast fuse protection
▲Phase protection
Our products of High Current Rectifier (HRC) are customized according to clients’s parameters.They are used in variety of applications as follows:
1.Plating: Chrome, Zine, Nickel, Copper, Gold, Silver
2.Metal smelting: Aluminum, Copper, Zine, Lead, Manganese, Magnesium, etc.
3.Ionic membrane: Electrolysis of salt, etc
4.Silicon carbide smelting & Graphitization furnace
5.Experimental power supply
6.Copper foil, aluminum foil special power supply
7.Electrochemical: Chlor-alkali, etc
8.Electrolysis: Copper, Zine, Tin, Lead, Aluminum foil, Copper foil
The expert teams with 20 years experience can supply equipment design,manufacture, upgrading and after sales service. It’s quality management system meets the requirement of the ISO9001:2008 standard. The Technical level of main equpment is ten years ahead in China,and the control system is twenty years ahead at home and abroad.
We service with pride and care and give you a best solution.
Packing Details:In iron sheet case with waterproof and anti collision treatment
Delivery Details: 1-3 months, depending on your technical parameters
Please give us the follows technical information before order:
1 A.C. INPUT
• A.C: rated voltage
• Phases
• Frequency
2 D.C. OUTPUT
• Rated D.C. voltage
• Rated D.C. current
• D.C. voltage fine control range (thyristors)
• D.C: current control range
• Accuracy of current fine control
• Pulse number
• Ripple
1. Within the first year, if you need any spare parts for replacement, we can provide to you without
paid. And we will offer lifelong technical support and service.
2. Within the first year, if you need any spare parts for replacement, we can provide to you without
paid. And we will offer lifelong technical support and service.
1.Q:Are you a factory or trading company?
A: We are a factory.
2. Q: Where is your factory? How can I visit there?
A: Our factory is located in Xi’an, middle part of China, about an hour bus ride from Xi’an Xianyang Airport, which in the starting point of Ancient Silk Road.Welcome to visit us.
3. Q:When can I get the price?
A:Usually we quote within 24 hours after we get your inquiry.